Esun ABS+ Filament 1kg 1.75mm

NOTICE: Some spools may come with plastic spools while some may come with paper spools. eSUN is in the process of transioning into paper spools.



eSUN abs+ 3d printer material based on the modification of ABS material. ABS+ filament has higher mechanical properties, lower odor and lower shrinkage rate than conventional ABS materials.

With high toughness and high impact resistance, eSUN abs+ 3d printer material, can be used to print sturdy and durable parts. ABS plus is low VOC volatile content, low odor during printing, comfortable printing without pressure; abs+ filament has low shrinkage, not easy to warp and crack during printing.

Selling point
Heat resistance
Sturdy and durable
High toughness
Low odor
Low shrinkage
High impact resistance
Excellent printability

Filament Properties Table
3D PRINTING FILAMENT: ABS+
Density(g/cm3): 1.06
Heat Distortion Temp(℃,0.45MPa): 73
Melt Flow Index(g/10min): 15(220℃/10kg）
Tensile Strength(MPa): 40
Elongation at Break(%): 30
Flexural Strength(MPa): 68
Flexural Modulus(MPa): 1203
IZOD Impact Strength(kJ/㎡): 42
Durability: 8/10
Printability: 8/10

Recommended printing parameters
Extruder Temperature(℃): 230 – 270℃
Recommended temperature: 240℃
Bed temperature(℃): 95 – 110°C
Fan Speed: 0%
Printing Speed: 40 – 100mm/s
Heated Bed: Required

Print recommend Print in an enclosed space